FIDS - NZ Customised Aluminium Aviaries and Cages
CUSTOM AVIARIES
Below is just a sample of the many aviaries and cages manufactured over the past few years.
We often get asked to quote for an aviary of specific size, say 2m high by 2m wide by 6m long with a covered area. We almost exclusively use 25mm sq mesh which is 2mm thick and comes in rolls 91.5mm wide. There is one supplier of this mesh in NZ and we are not prepared to import mesh of unknown quality from overseas. Therefore, as a result, for effective use of the mesh we make the height OR the width of the panels in multiples of 930mm wide. i.e. 1860 high or wide. If you are thinking of having an aviary built have this in mind when you think about your designs.
A bank of 4 aviaries 2.4 x 7.2m with a communal passageway to access them from the back under cover.
FIDS aviaries with a 2m central passageway to service all the individual flight sections.
A new bank of aviaries to replace the old at a public garden and beauty spot.
A lovely corner aviary designed by the owner and sitting on their deck where there is a beautiful sea view (sea view not included).
2 different style banks of 6 suspended aviaries for the same customer. In the latter the customer supplied simple rectangular cages which were housed in the frame. The whole unit was stepped into the sloping ground.
A suspended aviary which is wider than the standard at 1.2m.
A bank of 3 aviaries.
A standard suspended aviary with slimline zincalume covering.